% echo > %HOMEDRIVE%\%HOMEPATH%\eve-overrides\server On Microsoft Windows OS: % cd %HOMEDRIVE%\%HOMEPATH% % docker run -v $HOME/eve-overrides:/in -rm lfedge/eve:8.4.0-kvm-arm64 installer_raw > installer.raw To override the default EVE Controller URL or to specify a specific EVE-OS version: Or can specify an EVE-OS version, e.g., lfedge/eve:8.4.0-kvm-arm64 (The first step is optional) arm64$ docker pull lfedge/eve: latest-arm64Īrm64$ docker run -rm lfedge/eve: latest-arm64 -f raw installer_raw > installer.raw Create an EVE-OS installer image and flash it onto a USB stickįor arm64 platforms (such as the Raspberry Pi 4):.If you have an HDMI display connected, the HDMI display will be all green on successĪfter the bootloader update is complete, if connected to the serial console you would also see the following: SIG vl805.sig 6246230ecd5b472902e6a49c95e857a5e3190c4fa6c462d6a8867e9a5e523a7c 0 Boot the Raspberry Pi with the new SD card image and wait for at least 10 seconds, while the green activity LED blinks with a steady pattern.Insert a spare SD card into your ucompter.Remove the USB from the RPi and insert into your computer to read the newly created and unique soft serial number that is needed by the ZEDEDA Cloud controller for onboarding.Allow the USB application to install EVE-OS onto the blank SD card by waiting until the RPi is automatically powered down.Insert a blank SD card and the newly imaged USB stick into the RPi and boot.Flash the EVE-OS installer onto a USB stick.Power off the Raspberry Pi and remove the SD card.If you have an HDMI display connected, the HDMI display will be all green on success.If desired, check the README file of the newly imaged SD CARD (rescue disk files).Click Continue and eject the SD card from your computer.From the next window, select USB Boot as the boot-mode.From the next window, select Bootloader.From the popup dialog, select Misc utility images. From the RPi Imager application, under Operating System, click CHOOSE OS.Insert a spare SD card into your computer.Download Raspberry Pi Imager and launch the application.This document augments the online document with screenshots and other notes. The below instructions describe this method: “Using Raspberry Pi Imager to update the bootloader (recommended)”. The RPi Imager application lets you update and change to USB boot in the same process, which is detailed below.Īdditional reference information on RPi boot modes and bootloader configuration is available online. Updating to the latest version of the RPi bootloader can also incorporate a configuration change to boot from USB (before SD). Take note of the unique soft serial number assigned to the RPi by EVE-OS (step 18).Boot the RPi with the blank micro SD card and the prepared USB memory stick (steps 16-17).Prepare a blank micro SD card to insert into the RPi (step 16).Prepare a USB memory stick with the EVE-OS installer image (step 15).Update the RPi4 bootloader to the latest version and configure the RPi to boot from a USB memory stick (steps 1-14).(Instead of this approach, you can also flash a micro SD card with a pre-built EVE-OS image specific to RPi4.) Highlights of the approach are described below: This document assumes you will use the standard EVE-OS installation approach that runs an installer from a USB memory stick to initiate the EVE-OS image installation process on a blank micro SD card that will be inserted into the RPi. (These media will be completely overwritten!) It’s also helpful to have your RPi connected to an HDMI monitor. To install EVE-OS onto a Raspberry Pi 4 (RPi4), you will need 1-2 micro SD cards and one USB memory stick, at a minimum. 2 microSD cards (1G or larger) - can get by with one if re-use it for fw update and EVE-OS.Raspberry Pi 4 (RPi4) with 4 or 8GB RAM.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |